The Pin-Rivet, cataloged under National Stock Number 5320-01-698-7577, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-698-7577 |
| Primary Part Number | HLT127-12-14 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Shank Diameter | 0.4047 INCHES MINIMUM AND 0.4057 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Head Height | 0.0759 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM IN |
| Fastener Length | 1.465 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416, TYPE II, CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS6415 ASSN STD 1ST MATERIAL RESPONSE OR AMS6349 ASSN STD 2ND MATERIAL RESPONSE OR AMS6382 ASSN STD 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 3RD MATERIAL RESPONSE OVERALL |
| Head Style | COUNTERSUNK W/REVERSE CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.375 INCHES IN |
| Grip Length | 0.875 INCHES NOMINAL IN |
| Width Between Flats | 0.1582 INCHES MINIMUM AND 0.1617 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.5866 INCHES MINIMUM AND 0.5916 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT127-12-14 | Hi-Shear Corporation (USA) |
| HLT127-12-14 PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HLT127-12-14 | West Coast Aerospace, Inc. (USA) |
| HLT127-12-14 | Jet-Tek, Llc Dba Jet-Tek (USA) |
| Reference | Meaning |
|---|---|
| HLT127-12-14 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5320-01-698-7577 is a Pin-Rivet, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-698-7577 has 4 manufacturer part numbers on file: HLT127-12-14 (Hi-Shear Corporation), HLT127-12-14 (Sps Technologies, Llc Dba PB Fasteners), HLT127-12-14 (West Coast Aerospace, Inc.), HLT127-12-14 (Jet-Tek, Llc Dba Jet-Tek).
Key specifications for HLT127-12-14: Shank Diameter: 0.4047 INCHES MINIMUM AND 0.4057 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Head Height: 0.0759 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM IN; Fastener Length: 1.465 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.