The Pin-Rivet, cataloged under National Stock Number 5320-01-696-6745, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-696-6745 |
| Primary Part Number | HLT126-8-6 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Head Height | 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN |
| Fastener Length | 0.81 INCHES NOMINAL IN |
| Tip Diameter | 0.2410 INCHES MINIMUM AND 0.2440 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.2500 INCHES IN |
| Grip Length | 0.375 INCHES MAXIMUM IN |
| Width Between Flats | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, TAPERED, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Shear Strength | 108000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.387 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT126-8-6 PRIMARY | Hi-Shear Corporation (USA) |
NSN 5320-01-696-6745 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-696-6745 has 1 manufacturer part number on file: HLT126-8-6 (Hi-Shear Corporation).
Key specifications for HLT126-8-6: Shank Diameter: 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Head Height: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN; Fastener Length: 0.81 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.