The Pin-Rivet, cataloged under National Stock Number 5320-01-696-2850, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-696-2850 |
| Primary Part Number | HLT116-16-38 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Head Height | 0.178 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Fastener Length | 3.05 INCHES MINIMUM AND 3.07 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS-QQ-P-416,TY II, CL 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS6415, AMS6349,AMS6322 OR AMS6327 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | COUNTERSUNK W/REVERSE CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.500 INCHES IN |
| Grip Length | 2.370 INCHES MINIMUM AND 2.385 INCHES MAXIMUM IN |
| Width Between Flats | 0.2207 INCHES MINIMUM AND 0.2242 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 90.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 4340 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.735 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT116-16-38 PRIMARY | Hi-Shear Corporation (USA) |
| HLT116-16-38 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| HL116 | D/9 Drawing number reference only Hi-Shear Corporation |
NSN 5320-01-696-2850 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-696-2850 has 2 manufacturer part numbers on file: HLT116-16-38 (Hi-Shear Corporation), HLT116-16-38 (Sps Technologies, Llc Dba PB Fasteners).
1 possible match (shared part number, not a government interchangeability claim): 5320-01-696-2858. Verify interchangeability with system specifications before substitution.
Key specifications for HLT116-16-38: Shank Diameter: 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Head Height: 0.178 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN; Fastener Length: 3.05 INCHES MINIMUM AND 3.07 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.