The Pin-Rivet, cataloged under National Stock Number 5320-01-695-8156, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-695-8156 |
| Primary Part Number | HL219-5-14 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Fastener Length | 1.200 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-5000 OR MIL-S-5625 OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.875 INCHES MAXIMUM IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 6130 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL219-5-14 PRIMARY | Hi-Shear Corporation (USA) |
| HL219-5-14 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| HL219-5-14 | 5/2 Secondary reference U.S. Government activity |
| HL219 | D/9 Drawing number reference only Hi-Shear Corporation |
NSN 5320-01-695-8156 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-695-8156 has 2 manufacturer part numbers on file: HL219-5-14 (Hi-Shear Corporation), HL219-5-14 (Sps Technologies, Llc Dba PB Fasteners).
1 possible match (shared part number, not a government interchangeability claim): 5320-01-695-8184. Verify interchangeability with system specifications before substitution.
Key specifications for HL219-5-14: Shank Diameter: 0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Fastener Length: 1.200 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.