The Pin-Rivet, cataloged under National Stock Number 5320-01-666-8883, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-666-8883 |
| Primary Part Number | HL411-6-2 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.2177 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN |
| Fastener Length | 0.450 INCHES NOMINAL IN |
| Material Document and Classification | AMS 4928 ASSN STD 1ST MATERIAL RESPONSE OR AMS 4967 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.125 INCHES NOMINAL IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | TITANIUM ALLOY UNS R56400 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.3253 INCHES MINIMUM AND 0.3303 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL411-6-2 PRIMARY | Hi-Shear Corporation (USA) |
NSN 5320-01-666-8883 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-666-8883 has 1 manufacturer part number on file: HL411-6-2 (Hi-Shear Corporation).
Key specifications for HL411-6-2: Shank Diameter: 0.2177 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN; Fastener Length: 0.450 INCHES NOMINAL IN; Material Document and Classification: AMS 4928 ASSN STD 1ST MATERIAL RESPONSE OR AMS 4967 ASSN STD 2ND MATERIAL RESPONSE OVERALL; Head Style: FLUSH COUNTERSUNK. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.