The Pin-Rivet, cataloged under National Stock Number 5320-01-662-3905, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Calder Testers, Inc. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-662-3905 |
| Primary Part Number | TLV330L-7-20E |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Calder Testers, Inc |
| Status | ACTIVE |
| Shank Diameter | 0.5091 INCHES NOMINAL IN |
| Lubrication | CETYL ALCOHOL AND DRY FILM |
| Fastener Length | 1.735 INCHES NOMINAL IN |
| Material Document and Classification | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Tip Diameter | 0.4890 INCHES NOMINAL IN |
| Head Style | FLUSH COUNTERSUNK |
| Nominal Thread Size | 0.4375 INCHES IN |
| Shank Style | PIN-RIVET, TAPERED, THREADED |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 95000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | TITANIUM ALLOY UNS R56400 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.888 INCHES MINIMUM AND 0.971 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| TLV330L-7-20E | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| TLV330L-7-20E PRIMARY | Calder Testers, Inc (USA) |
NSN 5320-01-662-3905 is a Pin-Rivet, manufactured by Calder Testers, Inc, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-662-3905 has 2 manufacturer part numbers on file: TLV330L-7-20E (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), TLV330L-7-20E (Calder Testers, Inc).
Key specifications for TLV330L-7-20E: Shank Diameter: 0.5091 INCHES NOMINAL IN; Lubrication: CETYL ALCOHOL AND DRY FILM; Fastener Length: 1.735 INCHES NOMINAL IN; Material Document and Classification: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.