The Pin-Rivet, cataloged under National Stock Number 5320-01-649-3008, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-649-3008 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Lubrication | DRY FILM |
| Fastener Length | 1.16 INCHES MINIMUM AND 1.20 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Nominal Thread Size | 0.19 INCHES IN |
| Grip Length | 0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | NICKEL AND CADMIUM OVERALL |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 156000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.305 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS4452H06-14E | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-649-3008 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-649-3008: Shank Diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN; Lubrication: DRY FILM; Fastener Length: 1.16 INCHES MINIMUM AND 1.20 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.