The Pin-Rivet, cataloged under National Stock Number 5320-01-648-1446, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-648-1446 |
| Primary Part Number | HL12VAP5-13 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.162 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN |
| Head Height | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Fastener Length | 1.114 INCHES MINIMUM AND 1.134 INCHES MAXIMUM IN |
| Head Style | COUNTERSUNK W/REVERSE CHAMFER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN |
| Width Between Flats | 0.064 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 90.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Material | TITANIUM ALLOY UNS R56400 OVERALL |
| Thread Series Designator | UNJC |
| Head Major Diameter | 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL12VAP5-13 PRIMARY | Hi-Shear Corporation (USA) |
NSN 5320-01-648-1446 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-648-1446 has 1 manufacturer part number on file: HL12VAP5-13 (Hi-Shear Corporation).
Key specifications for HL12VAP5-13: Shank Diameter: 0.162 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN; Head Height: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN; Fastener Length: 1.114 INCHES MINIMUM AND 1.134 INCHES MAXIMUM IN; Head Style: COUNTERSUNK W/REVERSE CHAMFER. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.