The Rivet,blind, cataloged under National Stock Number 5320-01-625-2924, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Div Huck Products Division. Government technical data includes 10 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-625-2924 |
| Primary Part Number | S7MLS100-M05-05 |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Huck International, Inc. Div Huck Products Division |
| Status | ACTIVE |
| Shank Diameter | 0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN |
| Fastener Length | 0.754 INCHES NOMINAL IN |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.251 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Shank Style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| Countersink Angle | 98.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Material | IRON ALLOY 660 STEM |
| Material | NICKEL ALLOY SLEEVE |
| Material | IRON ALLOY 660 OR STEEL COMP 316 OR NICKEL ALLOY LOCKING RING |
| Head Major Diameter | 0.239 INCHES MINIMUM AND 0.247 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| S7MLS100-M05-05 PRIMARY | Huck International, Inc. Div Huck Products Division (USA) |
| S7MLS100-M05-05 | Huck International, Inc (USA) |
NSN 5320-01-625-2924 is a Rivet,blind, manufactured by Huck International, Inc. Div Huck Products Division, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-625-2924 has 2 manufacturer part numbers on file: S7MLS100-M05-05 (Huck International, Inc. Div Huck Products Division), S7MLS100-M05-05 (Huck International, Inc).
Key specifications for S7MLS100-M05-05: Shank Diameter: 0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN; Fastener Length: 0.754 INCHES NOMINAL IN; Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER); Grip Length: 0.251 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.