The Pin-Rivet, cataloged under National Stock Number 5320-01-607-1499, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 8 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 8 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-607-1499 |
| Primary Part Number | HL111V79-6-11 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Width Across Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Head Height | 0.0394 INCHES MINIMUM AND 0.0415 INCHES MAXIMUM IN |
| Fastener Length | 1.0025 INCHES MINIMUM AND 1.0225 INCHES MAXIMUM IN |
| Identification Code Color | RED |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE COLLAR |
| Collar Inside Diameter | 0.208 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN |
| Collar Overall Height | 0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN |
| Collar Style | THREADED BREAK OFF TYPE |
| Collar Outside Diameter | 0.318 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Heat Treatment | T-6 SOLUTION HEAT TREATED COLLAR |
| Material Document and Classification | 6AL-4V TITANIUM ALLOY PER AMS4928 OR AMS4967 NATIONAL SPEC SINGLE MATERIAL RESPONSE BOLT V |
| Material Document and Classification | QQ-A-430 OR QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE COLLAR |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 10.0 INCHES IN |
| Grip Length | 0.6825 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM IN |
| Width Between Flats | 0.104 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | ANODIZE COLLAR |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 6130 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3B |
| Thread Quantity Per Inch | 32 |
| Material | ALUMINUM ALLOY 2024 COLLAR |
| Material | TITANIUM ALLOY BOLT |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL111V79-6-11 | Sps Technologies Ltd, Tj Brooks Division (GBR) |
| HL111V79-6-11 | Huck International, Inc (USA) |
| HL111V79-6-11 PRIMARY | Hi-Shear Corporation (USA) |
| HL111V79-6-11 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| HL111V79-6-11 | Howmet Global Fastening Systems Inc (USA) |
| HL111V79-6-11 | West Coast Aerospace, Inc. (USA) |
| HL111V79-6-11 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HL111V79-6-11 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| Reference | Meaning |
|---|---|
| HL111V79-6-11 | 5/2 Secondary reference U.S. Government activity |
| HL111V79-6-11 | 5/2 Secondary reference U.S. Government activity |
| HL111 | D/9 Drawing number reference only Hi-Shear Corporation |
NSN 5320-01-607-1499 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-607-1499 has 8 manufacturer part numbers on file: HL111V79-6-11 (Sps Technologies Ltd, Tj Brooks Division), HL111V79-6-11 (Huck International, Inc), HL111V79-6-11 (Hi-Shear Corporation), HL111V79-6-11 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), HL111V79-6-11 (Howmet Global Fastening Systems Inc) and 3 more.
8 possible matches (shared part number, not a government interchangeability claim): 5320-01-607-1502, 5320-01-691-5650, 5320-01-691-5676. Verify interchangeability with system specifications before substitution.
Key specifications for HL111V79-6-11: Shank Diameter: 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Width Across Flats: 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN; Head Height: 0.0394 INCHES MINIMUM AND 0.0415 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.