The Rivet,solid, cataloged under National Stock Number 5320-01-603-7654, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-603-7654 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| Head Height | 0.042 INCHES NOMINAL IN |
| Fastener Length | 0.3025 INCHES MINIMUM AND 0.3225 INCHES MAXIMUM IN |
| Chamfer Length | 0.003 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-A-8625,TYPE II,CLASS I,CLEAR MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Shank Style | STRAIGHT W/RADIUS CHAMFERED TIP |
| Surface Treatment | ANODIZE OVERALL |
| Countersink Angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| Material | ALUMINUM ALLOY 2117 OVERALL |
| Head Major Diameter | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM20426 | 5/1 Secondary reference U.S. Government activity |
| MS20426AD4-5A | 2/2 Government specification standardization U.S. Government activity |
| BACR15BA4AD5C | 5/1 Secondary reference U.S. Government activity |
NSN 5320-01-603-7654 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-603-7654: Shank Diameter: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN; Head Height: 0.042 INCHES NOMINAL IN; Fastener Length: 0.3025 INCHES MINIMUM AND 0.3225 INCHES MAXIMUM IN; Chamfer Length: 0.003 INCHES MINIMUM AND 0.007 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.