The Rivet,blind, cataloged under National Stock Number 5320-01-601-2542, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-601-2542 |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN |
| Head Height | 0.065 INCHES NOMINAL IN |
| Fastener Length | 1.088 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OR QQ-P-416, TYPE I, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| Surface Treatment Document and Classification | QQ-P*416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE NUT |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5641 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.280 INCHES MINIMUM AND 0.341 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM NUT |
| Surface Treatment | PASSIVATE OR CADMIUM SLEEVE |
| Minimum Tensile Strength | 1400 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 5240 DOUBLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 303 OR STEEL COMP 304 SLEEVE |
| Material | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 NUT |
| Head Major Diameter | 0.313 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| PLT1009-6-6 | 3/2 Design control — primary reference U.S. Government activity |
| PLT1009 | D/9 Drawing number reference only U.S. Government activity |
| PLT1009-6-6 | 5/2 Secondary reference U.S. Government activity |
NSN 5320-01-601-2542 is a Rivet,blind, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-601-2542: Shank Diameter: 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN; Head Height: 0.065 INCHES NOMINAL IN; Fastener Length: 1.088 INCHES MINIMUM AND 1.118 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OR QQ-P-416, TYPE I, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.