The Pin-Rivet, cataloged under National Stock Number 5320-01-522-9399, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-522-9399 |
| Primary Part Number | HL20PB70-6-3 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Shank Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Head Height | 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE COLLAR |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| Collar Inside Diameter | 0.192 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN |
| Collar Overall Height | 0.437 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN |
| Collar Style | THREADED BREAK OFF TYPE |
| Collar Outside Diameter | 0.303 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE COLLAR |
| Material Document and Classification | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6349 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| Head Style | COUNTERSUNK W/REVERSE CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.187 INCHES NOMINAL IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM AND CHROMATE BODY |
| Surface Treatment | ANODIZE COLLAR |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 90.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | ALUMINUM ALLOY 2024 COLLAR |
| Material | STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 BODY |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL20PB70-6-3 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HL20PB70-6-3 PRIMARY | Hi-Shear Corporation (USA) |
NSN 5320-01-522-9399 is a Pin-Rivet, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-522-9399 has 2 manufacturer part numbers on file: HL20PB70-6-3 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HL20PB70-6-3 (Hi-Shear Corporation).
Key specifications for HL20PB70-6-3: Shank Diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN; Head Height: 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE COLLAR; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BODY. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.