The Pin-Rivet, cataloged under National Stock Number 5320-01-519-6795, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-519-6795 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Head Height | 0.077 INCHES NOMINAL IN |
| Fastener Length | 0.850 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.3750 INCHES IN |
| Grip Length | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Width Between Flats | 0.1582 INCHES MINIMUM AND 0.1617 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 10000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| Shear Strength | 27600 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.524 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| EL1382NN12-6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-519-6795 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-519-6795: Shank Diameter: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN; Head Height: 0.077 INCHES NOMINAL IN; Fastener Length: 0.850 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.