The Rivet,tubular, cataloged under National Stock Number 5320-01-519-4960, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-519-4960 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN |
| Head Height | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Fastener Length | 0.688 INCHES NOMINAL IN |
| Hole Depth | 0.124 INCHES MINIMUM IN |
| Material Document and Classification | QQ-A-430 2117 T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | COUNTERSUNK W/ REVERSE CHAMFER |
| Shank Style | TUBULAR |
| Surface Treatment | ANODIZE OVERALL |
| Minimum Tensile Strength | 26000 POUNDS PER SQUARE INCH LBS |
| Material | ALUMINUM ALLOY 2117 OVERALL |
| Head Major Diameter | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| Hole Diameter | 0.077 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| LS1120-4-22 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-519-4960 is a Rivet,tubular, classified under FSC 5320, Rivets. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5320-01-578-5355. Verify interchangeability with system specifications before substitution.
Key specifications for 5320-01-519-4960: Shank Diameter: 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN; Head Height: 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN; Fastener Length: 0.688 INCHES NOMINAL IN; Hole Depth: 0.124 INCHES MINIMUM IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.