The Pin-Rivet, cataloged under National Stock Number 5320-01-491-4489, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-491-4489 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.2177 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL AND DRY FILM |
| Fastener Length | 0.570 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | PASSIVATE OVERALL |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.3223 INCHES MINIMUM AND 0.3306 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3M1255E3L4 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-491-4489 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5320-01-510-3432. Verify interchangeability with system specifications before substitution.
Key specifications for 5320-01-491-4489: Shank Diameter: 0.2177 INCHES MINIMUM AND 0.2182 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL AND DRY FILM; Fastener Length: 0.570 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN; Head Style: FLUSH COUNTERSUNK. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.