The Pin-Rivet, cataloged under National Stock Number 5320-01-481-2360, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Wesco Aircraft Hardware Corp. Dba Incora. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-481-2360 |
| Primary Part Number | HL 18-6-18 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Wesco Aircraft Hardware Corp. Dba Incora |
| Status | ACTIVE |
| Shank Diameter | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Head Height | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN |
| Fastener Length | 2.125 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 1.125 INCHES NOMINAL IN |
| Width Between Flats | 0.079 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL 18-6-18 PRIMARY | Wesco Aircraft Hardware Corp. Dba Incora (USA) |
NSN 5320-01-481-2360 is a Pin-Rivet, manufactured by Wesco Aircraft Hardware Corp. Dba Incora, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-481-2360 has 1 manufacturer part number on file: HL 18-6-18 (Wesco Aircraft Hardware Corp. Dba Incora).
Key specifications for HL 18-6-18: Shank Diameter: 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Head Height: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN; Fastener Length: 2.125 INCHES NOMINAL IN; Thread Direction: RIGHT-HAND. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.