The Rivet,blind, cataloged under National Stock Number 5320-01-480-0125, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-480-0125 |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416, TYPE II, CLASS 3, CODED PB FED SPEC SINGLE TREATMENT RESPONSE EXPANDER |
| Heat Treatment | ANNEALED SLEEVE |
| Material Document and Classification | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE EXPANDER |
| Material Document and Classification | QQ-S-763 OR 18-9 LW BY ARMCO FED SPEC 1ST MATERIAL RESPONSE SLEEVE |
| Head Style | DISHED COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.100 INCHES IN |
| Grip Length | 0.1875 INCHES NOMINAL IN |
| Shank Style | STRAIGHT |
| Surface Treatment | CADMIUM EXPANDER |
| Countersink Angle | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| Shear Strength | 125000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3B |
| Thread Quantity Per Inch | 32 |
| Material | STEEL CORROSION RESISTING SLEEVE |
| Material | STEEL CORROSION RESISTING EXPANDER |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.367 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| HS5464-1032PB03 | 5/9 Secondary reference Mcdonnell Douglas Helicopter Co Inc |
| HS5464-1032PB03 | 3/1 Design control — primary reference The Boeing Company |
NSN 5320-01-480-0125 is a Rivet,blind, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-480-0125: Shank Diameter: 0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416, TYPE II, CLASS 3, CODED PB FED SPEC SINGLE TREATMENT RESPONSE EXPANDER; Heat Treatment: ANNEALED SLEEVE; Material Document and Classification: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE EXPANDER. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.