The Pin-Rivet, cataloged under National Stock Number 5320-01-428-3010, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-428-3010 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.3271 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM IN |
| Fastener Length | 1.036 INCHES MINIMUM AND 1.076 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.312 INCHES IN |
| Grip Length | 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Width Between Flats | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | NICKEL AND CADMIUM OVERALL |
| Countersink Angle | 99.0 DEGREES NOMINAL AND 101.1 DEGREES MINIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.456 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS4452H10-10R | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-428-3010 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-428-3010: Shank Diameter: 0.3271 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM IN; Fastener Length: 1.036 INCHES MINIMUM AND 1.076 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Material Document and Classification: AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.