The Pin-Rivet, cataloged under National Stock Number 5320-01-398-9488, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-398-9488 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Head Height | 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN |
| Fastener Length | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN |
| Tip Diameter | 0.1810 INCHES MINIMUM AND 0.1840 INCHES MAXIMUM IN |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, TAPERED, THREADED |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Material | STEEL COMP 303 COLLAR |
| Material | STEEL COMP E4340 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| S10078-5-6 | 7/2 Vendor item drawing reference L3harris Technologies Integrated Systems L.p. Dba L3harris Technologies |
| HL20PB86PB-5-6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-398-9488 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-398-9488: Shank Diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN; Head Height: 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN; Fastener Length: 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN; Tip Diameter: 0.1810 INCHES MINIMUM AND 0.1840 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.