The Rivet,solid, cataloged under National Stock Number 5320-01-394-2425, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-394-2425 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| Fastener Length | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-A-8625, TYPE II, CLASS 1, CLEAR MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Heat Treatment | T-4 SOLUTION HEAT TREATED OVERALL |
| Material Document and Classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Specification/standard Data | 96906-MS20426 GOVERNMENT SPECIFICATION |
| Shank Style | STRAIGHT W/RADIUS CHAMFERED TIP |
| Surface Treatment | ANODIZE OVERALL |
| Countersink Angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| Material | ALUMINUM ALLOY 2117 OVERALL |
| Head Major Diameter | 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20426AD3-17A | 5/9 Secondary reference U.S. Government activity |
| MS20426AD3-17A | 3/2 Design control — primary reference U.S. Government activity |
| MIL-R-5674 | 5/9 Secondary reference U.S. Government activity |
| MIL-R-5674 | 3/1 Design control — primary reference U.S. Government activity |
NSN 5320-01-394-2425 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-394-2425: Shank Diameter: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN; Fastener Length: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-A-8625, TYPE II, CLASS 1, CLEAR MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Heat Treatment: T-4 SOLUTION HEAT TREATED OVERALL. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.