The Pin-Rivet, cataloged under National Stock Number 5320-01-388-5020, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-388-5020 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL |
| Fastener Length | 0.785 INCHES MINIMUM AND 0.825 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Specification/standard Data | 80205-NAS4452 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.439 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Width Between Flats | 0.791 INCHES MINIMUM AND 0.806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | NICKEL AND CADMIUM OVERALL |
| Countersink Angle | 101.0 DEGREES MAXIMUM |
| Shear Strength | 156000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.305 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS4452H06-08P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-388-5020 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-388-5020: Shank Diameter: 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL; Fastener Length: 0.785 INCHES MINIMUM AND 0.825 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.