The Pin-Rivet, cataloged under National Stock Number 5320-01-387-6748, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Div Voi-Shan Products. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 9 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-387-6748 |
| Primary Part Number | HLT915LP-12-8 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Howmet Global Fastening Systems Inc. Div Voi-Shan Products |
| Status | ACTIVE |
| Shank Diameter | 0.3736 INCHES MINIMUM AND 0.3746 INCHES MAXIMUM IN |
| Lubrication | SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Fastener Length | 1.035 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8740 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.375 INCHES IN |
| Grip Length | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN |
| Width Between Flats | 0.1582 INCHES MINIMUM AND 0.1617 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 12480 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 23800 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.6862 INCHES MINIMUM AND 0.6912 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT915LP-12-8 | Huck International, Inc (USA) |
| HLT915LP-12-8 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HLT915LP-12-8 PRIMARY | Howmet Global Fastening Systems Inc. Div Voi-Shan Products (USA) |
| HLT915LP-12-8 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| C9570-12-8P | Howmet Global Fastening Systems Inc (USA) |
| HLT915LP12-8 | Howmet Global Fastening Systems Inc (USA) |
| HLT915LP-12-8 PRIMARY | Hi-Shear Corporation (USA) |
| AIC-L-807-12-8P | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| 4448S12-08P | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| 5320PL0730783 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| C9570-12-8P | 7/2 Vendor item drawing reference U.S. Government activity |
| 5320PL1804972 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| HLT915LP-12-8 | 5/9 Secondary reference U.S. Government activity |
| 5320PL1805621 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| HLT915LP-12-8 | 5/9 Secondary reference U.S. Government activity |
NSN 5320-01-387-6748 is a Pin-Rivet, manufactured by Howmet Global Fastening Systems Inc. Div Voi-Shan Products, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-387-6748 has 9 manufacturer part numbers on file: HLT915LP-12-8 (Huck International, Inc), HLT915LP-12-8 (Sps Technologies, Llc Dba PB Fasteners), HLT915LP-12-8 (Howmet Global Fastening Systems Inc. Div Voi-Shan Products), HLT915LP-12-8 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), C9570-12-8P (Howmet Global Fastening Systems Inc) and 4 more.
Key specifications for HLT915LP-12-8: Shank Diameter: 0.3736 INCHES MINIMUM AND 0.3746 INCHES MAXIMUM IN; Lubrication: SOLID FILM AND CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Fastener Length: 1.035 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.