The Pin-Rivet, cataloged under National Stock Number 5320-01-364-9282, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-364-9282 |
| Primary Part Number | HLT423SC-10-13 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Fastener Length | 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | H1-SHEAR SPEC 258,CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.312 INCHES IN |
| Grip Length | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN |
| Width Between Flats | 0.1270 INCHES MINIMUM AND 0.1296 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 210000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 125000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | NICKEL ALLOY 718 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT423SC-10-13 PRIMARY | Hi-Shear Corporation (USA) |
| HLT423SC-10-13 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HLT423SC-10-13 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HLT423SC-10-13 | West Coast Aerospace, Inc. (USA) |
| HLT423SC-10-13 | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| HLT423SC-10-13 | 5/2 Secondary reference U.S. Government activity |
| HLT423SC-10-13 | 5/9 Secondary reference Voi-Shan/chatsworth Div of Vsi Corp Sub of Fairchild Industries Inc |
| HLT423SC-10-13 | 5/9 Secondary reference U.S. Government activity |
NSN 5320-01-364-9282 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-364-9282 has 5 manufacturer part numbers on file: HLT423SC-10-13 (Hi-Shear Corporation), HLT423SC-10-13 (Sps Technologies, Llc Dba PB Fasteners), HLT423SC-10-13 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HLT423SC-10-13 (West Coast Aerospace, Inc.), HLT423SC-10-13 (Huck International, Inc).
Key specifications for HLT423SC-10-13: Shank Diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Fastener Length: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM IN; Surface Treatment Document and Classification: H1-SHEAR SPEC 258,CAGEC 73197 MFR REF SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.