The Pin-Rivet, cataloged under National Stock Number 5320-01-311-9404, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-311-9404 |
| Primary Part Number | HLT265TB-8-8-18 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Shank Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL |
| Head Height | 0.1060 INCHES MINIMUM AND 0.1230 INCHES MAXIMUM IN |
| Fastener Length | 0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | COUNTERSUNK W/REVERSE CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Grip Length | 0.505 INCHES MAXIMUM IN |
| Width Between Flats | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 6650 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT265TB-8-8-18 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HLT265TB-8-8-18 PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HLT265TB-8-8-18 PRIMARY | Hi-Shear Corporation (USA) |
| 3M757C4-8-18 | West Coast Aerospace, Inc. (USA) |
| 3M757C4-8-18 | The Boeing Company Div Defense (USA) |
| Reference | Meaning |
|---|---|
| HLT265TB-8-8-18 | 3/2 Design control — primary reference U.S. Government activity |
| HLT265TB-8-8-18 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| HLT265TB-8-8-18 | 5/9 Secondary reference U.S. Government activity |
NSN 5320-01-311-9404 is a Pin-Rivet, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-311-9404 has 5 manufacturer part numbers on file: HLT265TB-8-8-18 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HLT265TB-8-8-18 (Sps Technologies, Llc Dba PB Fasteners), HLT265TB-8-8-18 (Hi-Shear Corporation), 3M757C4-8-18 (West Coast Aerospace, Inc.), 3M757C4-8-18 (The Boeing Company Div Defense).
Key specifications for HLT265TB-8-8-18: Shank Diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL; Head Height: 0.1060 INCHES MINIMUM AND 0.1230 INCHES MAXIMUM IN; Fastener Length: 0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.