The Rivet,solid, cataloged under National Stock Number 5320-01-304-5837, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-304-5837 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN |
| Fastener Length | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Heat Treatment | T-4 SOLUTION HEAT TREATED OVERALL |
| Material Document and Classification | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Shank Style | STRAIGHT W/RADIUS CHAMFERED TIP |
| Surface Treatment | CHROMATE OVERALL |
| Countersink Angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| Shear Strength | 33000 SINGLE POUNDS PER SQUARE INCH |
| Material | ALUMINUM ALLOY 2017 OVERALL |
| Head Major Diameter | 0.480 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20426D8-15 | 3/2 Design control — primary reference U.S. Government activity |
| MS20426D8-15 | 5/9 Secondary reference U.S. Government activity |
| MIL-R-5674 | 5/9 Secondary reference U.S. Government activity |
| MIL-R-5674 | 3/1 Design control — primary reference U.S. Government activity |
| MS20426E8-15 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5320-01-304-5837 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-304-5837: Shank Diameter: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN; Fastener Length: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Heat Treatment: T-4 SOLUTION HEAT TREATED OVERALL. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.