The Pin-Rivet, cataloged under National Stock Number 5320-01-300-3256, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-300-3256 |
| Primary Part Number | HL221-8-14 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM IN |
| Lubrication | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| Fastener Length | 1.260 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-50004JDCMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Grip Length | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN |
| Width Between Flats | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 11800 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8640 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL221-8-14 | Hi-Shear Corporation (USA) |
| HL221-8-14 | Huck International, Inc (USA) |
| HL221-8-14 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HL221-8-14 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| Reference | Meaning |
|---|---|
| HL221-8-14 | 5/9 Secondary reference U.S. Government activity |
| HL221-8-14 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-300-3256 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-300-3256 has 4 manufacturer part numbers on file: HL221-8-14 (Hi-Shear Corporation), HL221-8-14 (Huck International, Inc), HL221-8-14 (Sps Technologies, Llc Dba PB Fasteners), HL221-8-14 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc).
Key specifications for HL221-8-14: Shank Diameter: 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP; Fastener Length: 1.260 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY II,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.