The Rivet,solid, cataloged under National Stock Number 5320-01-296-5375, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-296-5375 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| Fastener Length | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Heat Treatment | T-73 SOLUTION HEAT TREATED OVERALL |
| Material Document and Classification | QQ-A-430,T73 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Shank Style | STRAIGHT W/RADIUS CHAMFERED TIP |
| Surface Treatment | ANODIZE OVERALL |
| Countersink Angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| Shear Strength | 41000 SINGLE POUNDS PER SQUARE INCH |
| Material | ALUMINUM ALLOY 7075 OVERALL |
| Head Major Diameter | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20426E4-9A | 5/9 Secondary reference U.S. Government activity |
| MIL-R-5674 | 5/9 Secondary reference U.S. Government activity |
| MIL-R-5674 | 3/1 Design control — primary reference U.S. Government activity |
| MS20426E4-9A | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-296-5375 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-296-5375: Shank Diameter: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN; Fastener Length: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Heat Treatment: T-73 SOLUTION HEAT TREATED OVERALL. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.