The Pin-Rivet, cataloged under National Stock Number 5320-01-295-1615, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-295-1615 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Head Height | 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN |
| Fastener Length | 1.362 INCHES MINIMUM AND 1.392 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS2417 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| Hardness Rating | 51.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Grip Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| Width Between Flats | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | NICKEL AND ZINC OVERALL |
| Shear Strength | 15300 DOUBLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNF |
| Head Major Diameter | 0.387 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1324J16 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-295-1615 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-295-1615: Shank Diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Head Height: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN; Fastener Length: 1.362 INCHES MINIMUM AND 1.392 INCHES MAXIMUM IN; Surface Treatment Document and Classification: AMS2417 ASSN STD ALL TREATMENT RESPONSES OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.