The Pin-Rivet, cataloged under National Stock Number 5320-01-289-5083, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-289-5083 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.2754 INCHES NOMINAL IN |
| Lubrication | DRY FILM AND CETYL ALCOHOL |
| Fastener Length | 1.010 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Tip Diameter | 0.2642 INCHES NOMINAL IN |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Specification/standard Data | 80205-NAS1724 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.677 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, TAPERED, THREADED |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 260000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.426 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1724HC4-11E | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-289-5083 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-289-5083: Shank Diameter: 0.2754 INCHES NOMINAL IN; Lubrication: DRY FILM AND CETYL ALCOHOL; Fastener Length: 1.010 INCHES MINIMUM AND 1.035 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.