The Pin-Rivet, cataloged under National Stock Number 5320-01-283-4702, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 7 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-283-4702 |
| Primary Part Number | 4448S06-14P |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Shank Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Lubrication | DRY FILM AND CETYL ALCOHOL |
| Fastener Length | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN |
| Width Between Flats | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 108000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.356 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT915LP-6-14 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| C9570-6-14P | Howmet Global Fastening Systems Inc (USA) |
| C9570-6-14P | Howmet Global Fastening Systems Inc. Div Voi-Shan Products (USA) |
| HLT915LP-6-14 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| 4448S06-14P PRIMARY | Huck International, Inc (USA) |
| AIC-L-807-6-14P | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| HLT915LP-6-14 | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| C9570-6-14P | 5/9 Secondary reference Abounding Security Inc Div of Maa Corp |
| HLT915LP-6-14 | 5/9 Secondary reference U.S. Government activity |
| 5320PL0736053 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| 4448-6-14P | 5/9 Secondary reference Abounding Security Inc Div of Maa Corp |
| HLT915LP-6-14 | 5/2 Secondary reference U.S. Government activity |
| C9570-6-14P | 7/2 Vendor item drawing reference U.S. Government activity |
| 5320PL1667424 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5320-01-283-4702 is a Pin-Rivet, manufactured by Huck International, Inc, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-283-4702 has 7 manufacturer part numbers on file: HLT915LP-6-14 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), C9570-6-14P (Howmet Global Fastening Systems Inc), C9570-6-14P (Howmet Global Fastening Systems Inc. Div Voi-Shan Products), HLT915LP-6-14 (Sps Technologies, Llc Dba PB Fasteners), 4448S06-14P (Huck International, Inc) and 2 more.
Key specifications for 4448S06-14P: Shank Diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN; Lubrication: DRY FILM AND CETYL ALCOHOL; Fastener Length: 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.