The Rivet,solid, cataloged under National Stock Number 5320-01-267-4770, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-267-4770 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.221 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN |
| Fastener Length | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-A-8625,TYPE 11,CLASS 1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | QQ-A-430 MIL STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.100 INCHES NOMINAL IN |
| Shank Style | STRAIGHT W/RADIUS CHAMFERED TIP |
| Surface Treatment | ANODIZE OVERALL |
| Minimum Tensile Strength | 38000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 18000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 105.0 DEGREES MINIMUM AND 135.0 DEGREES MAXIMUM |
| Shear Strength | 26000 SINGLE POUNDS PER SQUARE INCH |
| Material | ALUMINUM ALLOY 2117 OVERALL |
| Head Major Diameter | 0.208 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS14218AD5-7 | 5/9 Secondary reference U.S. Government activity |
| MS14218AD5-7 | 3/2 Design control — primary reference U.S. Government activity |
| 10112358 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
NSN 5320-01-267-4770 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-267-4770: Shank Diameter: 0.221 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN; Fastener Length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-A-8625,TYPE 11,CLASS 1 MIL STD SINGLE TREATMENT RESPONSE OVERALL; Material Document and Classification: QQ-A-430 MIL STD SINGLE MATERIAL RESPONSE OVERALL. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.