The Pin-Rivet, cataloged under National Stock Number 5320-01-264-5116, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-264-5116 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.3897 INCHES NOMINAL IN |
| Lubrication | DRY FILM |
| Fastener Length | 0.953 INCHES MINIMUM AND 0.983 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS-5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Tip Diameter | 0.3815 INCHES NOMINAL IN |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.375 INCHES IN |
| Grip Length | 0.552 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, TAPERED, THREADED |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 125000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.583 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1724D6-9E | 3/2 Design control — primary reference U.S. Government activity |
| 10112348 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
NSN 5320-01-264-5116 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-264-5116: Shank Diameter: 0.3897 INCHES NOMINAL IN; Lubrication: DRY FILM; Fastener Length: 0.953 INCHES MINIMUM AND 0.983 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.