The Pin-Rivet, cataloged under National Stock Number 5320-01-227-9160, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-227-9160 |
| Primary Part Number | HL5090-10-26 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Shank Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Head Height | 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN |
| Fastener Length | 2.145 INCHES MINIMUM AND 2.165 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.312 INCHES IN |
| Grip Length | 1.630 INCHES MAXIMUM IN |
| Width Between Flats | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Shear Strength | 95000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.475 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL5090-10-26 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HL5090-10-26 PRIMARY | Hi-Shear Corporation (USA) |
| HL5090-10-26 | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| HL5090-10-26 | 5/9 Secondary reference U.S. Government activity |
| 11070301-25 | 7/2 Vendor item drawing reference Us Army Aviation and Missile Command |
| HL5090-10-26 | 5/9 Secondary reference U.S. Government activity |
| HL5090-10-26 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
NSN 5320-01-227-9160 is a Pin-Rivet, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-227-9160 has 3 manufacturer part numbers on file: HL5090-10-26 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HL5090-10-26 (Hi-Shear Corporation), HL5090-10-26 (Huck International, Inc).
Key specifications for HL5090-10-26: Shank Diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN; Head Height: 0.068 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN; Fastener Length: 2.145 INCHES MINIMUM AND 2.165 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.