The Rivet,tubular, cataloged under National Stock Number 5320-01-219-1307, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-219-1307 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Head Height | 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN |
| Fastener Length | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416A(1),CLASS 2,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL A |
| Hole Depth | 0.125 INCHES NOMINAL IN |
| Material Document and Classification | QQ-W-321C COMP 6,EIGHTH-HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | OVAL/TRUSS |
| Grip Length | 0.187 INCHES NOMINAL IN |
| Shank Style | TUBULAR |
| Surface Treatment | CADMIUM OVERALL |
| Material | COPPER ALLOY OVERALL |
| Head Major Diameter | 0.306 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN |
| Hole Diameter | 0.102 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 060-790024-1 | 1/2 Source control — Government-approved source U.S. Government activity |
| 060-790024-1 | 5/9 Secondary reference U.S. Government activity |
| SCD131-10 | 5/9 Secondary reference U.S. Government activity |
| 10/32S-643 | 3/9 Design control — primary reference Thomson J L Rivet Co |
NSN 5320-01-219-1307 is a Rivet,tubular, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-219-1307: Shank Diameter: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN; Head Height: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN; Fastener Length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416A(1),CLASS 2,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL A. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.