The Rivet,tubular, cataloged under National Stock Number 5320-01-215-7356, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-215-7356 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.244 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN |
| Head Height | 0.053 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN |
| Fastener Length | 0.562 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-F-495 MIL SPEC 1ST TREATMENT RESPONSE OVERALL |
| Heat Treatment | QUARTER HARD OVERALL |
| Hole Depth | 0.219 INCHES NOMINAL IN |
| Material Document and Classification | QQ-W-321 1/4 HARD FED SPEC ALL MATERIAL RESPONSES OVERALL |
| Head Style | COUNTERSUNK W/ REVERSE CHAMFER |
| Nondefinitive Spec/std Data | 13 TYPE AND F GRADE |
| Shank Style | TUBULAR |
| Surface Treatment | OXIDE OVERALL |
| Countersink Angle | 148.0 DEGREES MINIMUM AND 150.0 DEGREES MAXIMUM |
| Shear Strength | 35000 DOUBLE POUNDS PER SQUARE INCH |
| Material | COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL |
| Head Major Diameter | 0.478 INCHES MAXIMUM IN |
| Hole Diameter | 0.173 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-R-556 | 4/1 Identification reference U.S. Government activity |
| MS16536-244 | 2/2 Government specification standardization U.S. Government activity |
NSN 5320-01-215-7356 is a Rivet,tubular, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-215-7356: Shank Diameter: 0.244 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN; Head Height: 0.053 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN; Fastener Length: 0.562 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-F-495 MIL SPEC 1ST TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.