The Rivet,blind, cataloged under National Stock Number 5320-01-168-1112, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Div Huck Products Division. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-168-1112 |
| Primary Part Number | 0SMLS100-B06-04 |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Huck International, Inc. Div Huck Products Division |
| Status | ACTIVE |
| Shank Diameter | 0.200 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN |
| Fastener Length | 0.412 INCHES NOMINAL IN |
| Expansion Device | SERRATED STEM-TYPE W |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE STEM |
| Material Document and Classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| Material Document and Classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE LOCKING RING |
| Material Document and Classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Shank Style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| Surface Treatment | ANODIZE OR CHROMATE STEM |
| Minimum Tensile Strength | 715 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 108.0 DEGREES MAXIMUM |
| Shear Strength | 1165 SINGLE POUNDS PER SQUARE INCH |
| Material | ALUMINUM ALLOY 5056 LOCKING RING |
| Material | ALUMINUM ALLOY 2024 STEM |
| Material | ALUMINUM ALLOY 5056 SLEEVE |
| Head Major Diameter | 0.349 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 0SMLS100-B06-04 PRIMARY | Huck International, Inc. Div Huck Products Division (USA) |
| 0SMLS100-B06-04 | Huck (FRA) |
| Reference | Meaning |
|---|---|
| 0SMLS100-B06-04 | 5/9 Secondary reference Huck International, Inc |
NSN 5320-01-168-1112 is a Rivet,blind, manufactured by Huck International, Inc. Div Huck Products Division, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-168-1112 has 2 manufacturer part numbers on file: 0SMLS100-B06-04 (Huck International, Inc. Div Huck Products Division), 0SMLS100-B06-04 (Huck).
Key specifications for 0SMLS100-B06-04: Shank Diameter: 0.200 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN; Fastener Length: 0.412 INCHES NOMINAL IN; Expansion Device: SERRATED STEM-TYPE W; Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE STEM. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.