The Pin-Rivet, cataloged under National Stock Number 5320-01-135-9519, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-135-9519 |
| Primary Part Number | HLT265TB10-12-27 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Lubrication | SOLID FILM AND CETYL ALCOHOL |
| Fastener Length | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | CROWN COUTERSUNK GREATER THAN 135 DEGREES |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.312 INCHES IN |
| Grip Length | 0.755 INCHES MAXIMUM IN |
| Width Between Flats | 0.127 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | PASSIVATE OVERALL |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 125000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.6336 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HLT265TB-10-12-27 | West Coast Aerospace, Inc. (USA) |
| HLT265TB10-12-27 PRIMARY | Hi-Shear Corporation (USA) |
| HLT265TB10-12-27 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HLT265TB10-12-27 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| 10111557 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| 3M757C5-12-27 | C/1 Advisory reference — outside the item-of-supply concept The Boeing Company Div Defense |
| HLT265TB10-12-27 | 5/2 Secondary reference U.S. Government activity |
| HLT265TB10-12-27 | 5/9 Secondary reference U.S. Government activity |
| ST3M757C5-12-27 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
| HLT265TB10-12-27 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
NSN 5320-01-135-9519 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-01-135-9519 has 4 manufacturer part numbers on file: HLT265TB-10-12-27 (West Coast Aerospace, Inc.), HLT265TB10-12-27 (Hi-Shear Corporation), HLT265TB10-12-27 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HLT265TB10-12-27 (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for HLT265TB10-12-27: Shank Diameter: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN; Lubrication: SOLID FILM AND CETYL ALCOHOL; Fastener Length: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.