The Rivet,tubular, cataloged under National Stock Number 5320-01-115-0785, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-115-0785 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.118 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN |
| Head Height | 0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN |
| Fastener Length | 0.531 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Heat Treatment | QUARTER HARD OVERALL |
| Hole Depth | 0.094 INCHES NOMINAL IN |
| Material Document and Classification | QQ-W-321 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| Head Style | COUNTERSUNK W/ REVERSE CHAMFER |
| Nondefinitive Spec/std Data | 12 TYPE AND 3 CLASS AND F GRADE |
| Shank Style | TUBULAR |
| Surface Treatment | OXIDE OVERALL |
| Countersink Angle | 148.0 DEGREES MINIMUM AND 150.0 DEGREES MAXIMUM |
| Shear Strength | 35000 SINGLE POUNDS PER SQUARE INCH |
| Material | COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL |
| Head Major Diameter | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| Hole Diameter | 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS16536-25 | 2/2 Government specification standardization U.S. Government activity |
| FF-R-556 | 4/1 Identification reference U.S. Government activity |
NSN 5320-01-115-0785 is a Rivet,tubular, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-115-0785: Shank Diameter: 0.118 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN; Head Height: 0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN; Fastener Length: 0.531 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.