The Rivet,blind, cataloged under National Stock Number 5320-01-111-2835, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-111-2835 |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN |
| Fastener Length | 1.178 INCHES MAXIMUM IN |
| Expansion Device | SERRATED STEM-TYPE W |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM SLEEVE |
| Hardness Rating | 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.969 INCHES MINIMUM AND 1.032 INCHES MAXIMUM IN |
| Shank Style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| Surface Treatment | CADMIUM STEM |
| Surface Treatment | CADMIUM AND CHROMATE SLEEVE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 112000 SINGLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 8740 STEM |
| Material | STEEL COMP 4027 OR STEEL COMP 4037 OR STEEL COMP 4130 SLEEVE |
| Head Major Diameter | 0.386 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| VB90353-S6-16 | 5/9 Secondary reference U.S. Government activity |
| SB100-T06-16 | 5/9 Secondary reference Huck International, Inc |
| MS90353S0616 | 2/2 Government specification standardization U.S. Government activity |
| SB100-T6-16 | 5/9 Secondary reference Huck Mfg Co |
| 73755S0616 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| SB100-T06-16 | 5/9 Secondary reference Huck International, Inc. Div Huck Products Division |
NSN 5320-01-111-2835 is a Rivet,blind, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-111-2835: Shank Diameter: 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN; Fastener Length: 1.178 INCHES MAXIMUM IN; Expansion Device: SERRATED STEM-TYPE W; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.