The Collar,pin-Rivet, cataloged under National Stock Number 5320-01-058-0837, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-058-0837 |
| Item Name | Collar,pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Surface Treatment Document and Classification | MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Collar Inside Diameter | 0.318 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Collar Overall Height | 0.398 INCHES MINIMUM AND 0.413 INCHES MAXIMUM IN |
| Collar Outside Diameter | 0.516 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN |
| Heat Treatment | SOLUTION HEAT TREATED OVERALL |
| Material Document and Classification | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.312 INCHES IN |
| Specification/standard Data | 80205-NAS4445 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Surface Treatment | ANODIZE OVERALL |
| Thread Class | 3B |
| Thread Quantity Per Inch | 24 |
| Material | ALUMINUM ALLOY 2024 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5320PL0747469 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| NAS4445DD10 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-058-0837 is a Collar,pin-Rivet, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-058-0837: Surface Treatment Document and Classification: MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Collar Inside Diameter: 0.318 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN; Collar Overall Height: 0.398 INCHES MINIMUM AND 0.413 INCHES MAXIMUM IN; Collar Outside Diameter: 0.516 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.