The Rivet,tubular, cataloged under National Stock Number 5320-01-050-9674, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-050-9674 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.058 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN |
| Head Height | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN |
| Fastener Length | 0.281 INCHES NOMINAL IN |
| Heat Treatment | QUARTER HARD OVERALL |
| Hole Depth | 0.046 INCHES NOMINAL IN |
| Material Document and Classification | QQ-W-321,1/4 H FED SPEC ALL MATERIAL RESPONSES OVERALL |
| Head Style | OVAL/TRUSS |
| Nondefinitive Spec/std Data | 12 TYPE AND 3 CLASS AND F GRADE |
| Shank Style | TUBULAR |
| Surface Treatment | NICKEL OVERALL |
| Shear Strength | 350000 SINGLE POUNDS PER SQUARE INCH |
| Material | COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL |
| Head Major Diameter | 0.104 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN |
| Hole Diameter | 0.039 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS16535-17N | 5/9 Secondary reference U.S. Government activity |
| NASM16535-17N | 3/2 Design control — primary reference U.S. Government activity |
| FF-R-556 | 4/1 Identification reference U.S. Government activity |
| 4912243-12 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
NSN 5320-01-050-9674 is a Rivet,tubular, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-050-9674: Shank Diameter: 0.058 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN; Head Height: 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN; Fastener Length: 0.281 INCHES NOMINAL IN; Heat Treatment: QUARTER HARD OVERALL. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.