The Rivet,tubular, cataloged under National Stock Number 5320-01-047-6335, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-047-6335 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.118 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN |
| Head Height | 0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN |
| Fastener Length | 0.219 INCHES NOMINAL IN |
| Heat Treatment | QUARTER HARD OVERALL |
| Hole Depth | 0.094 INCHES NOMINAL IN |
| Material Document and Classification | QQ-W-321,1/4 H FED SPEC ALL MATERIAL RESPONSES OVERALL |
| Head Style | OVAL/TRUSS |
| Nondefinitive Spec/std Data | 12 TYPE AND 3 CLASS AND F GRADE |
| Shank Style | TUBULAR |
| Surface Treatment | NICKEL OVERALL |
| Shear Strength | 35000 DOUBLE POUNDS PER SQUARE INCH |
| Material | COPPER ALLOY 260 OR COPPER ALLOY 270 OVERALL |
| Head Major Diameter | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN |
| Hole Diameter | 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM16535-135N | 3/2 Design control — primary reference U.S. Government activity |
| 0361-0141 | 5/9 Secondary reference Lockheed Martin Corporation Div Rms - Mitchel Field |
| MS16535-135N | 5/9 Secondary reference U.S. Government activity |
| FF-R-556 | 4/1 Identification reference U.S. Government activity |
NSN 5320-01-047-6335 is a Rivet,tubular, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-047-6335: Shank Diameter: 0.118 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN; Head Height: 0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN; Fastener Length: 0.219 INCHES NOMINAL IN; Heat Treatment: QUARTER HARD OVERALL. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.