The Rivet,solid, cataloged under National Stock Number 5320-01-038-3442, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-038-3442 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN |
| Head Height | 0.095 INCHES NOMINAL IN |
| Fastener Length | 2.750 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Heat Treatment | T-4 SOLUTION HEAT TREATED OVERALL |
| Material Document and Classification | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 2.375 INCHES NOMINAL IN |
| Nondefinitive Spec/std Data | 2117 COMPOSITION AND T4 CONDITION AND DIMPLED FORM |
| Shank Style | STRAIGHT |
| Surface Treatment | ANODIZE OR OXIDE FILM OVERALL |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 26000 SINGLE POUNDS PER SQUARE INCH |
| Material | ALUMINUM ALLOY 2117 OVERALL |
| Head Major Diameter | 0.472 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20426AD8-44 | 3/2 Design control — primary reference U.S. Government activity |
| MS20426AD8-44 | 5/9 Secondary reference U.S. Government activity |
| MIL-R-5674 | 4/1 Identification reference U.S. Government activity |
NSN 5320-01-038-3442 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-038-3442: Shank Diameter: 0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN; Head Height: 0.095 INCHES NOMINAL IN; Fastener Length: 2.750 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.