The Rivet,solid, cataloged under National Stock Number 5320-01-014-1095, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-01-014-1095 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.124 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Head Height | 0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM IN |
| Fastener Length | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Heat Treatment | T-4 SOLUTION HEAT TREATED OVERALL |
| Material Document and Classification | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | UNDERSIZED OVAL COUNTERSUNK |
| Specification/standard Data | 80205-NAS1097 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Head Minor Diameter | 0.134 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN |
| Shank Style | STRAIGHT |
| Countersink Height | 0.029 INCHES NOMINAL IN |
| Surface Treatment | ANODIZE OR CHROMATE OVERALL |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 33000 SINGLE POUNDS PER SQUARE INCH |
| Material | ALUMINUM ALLOY 2017 OVERALL |
| Head Major Diameter | 0.174 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1097D4-28 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-01-014-1095 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-01-014-1095: Shank Diameter: 0.124 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Head Height: 0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM IN; Fastener Length: 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.