The Rivet,blind, cataloged under National Stock Number 5320-00-994-8148, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-994-8148 |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.310 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| Fastener Length | 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN |
| Expansion Device | SERRATED STEM-TYPE W |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| Material Document and Classification | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN |
| Shank Style | SELF-PLUGGING HIGH CLINCH SHANK |
| Surface Treatment | CADMIUM AND CHROMATE NUT |
| Surface Treatment | CADMIUM AND PASSIVATE SLEEVE |
| Surface Treatment | CADMIUM AND CHROMATE BOLT |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 14600 DOUBLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT |
| Material | STEEL COMP 304 OR STEEL COMP 303F OR STEEL COMP 303 SLEEVE |
| Material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT |
| Head Major Diameter | 0.573 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| WF312-9 | 3/2 Design control — primary reference U.S. Government activity |
| BA10A9F | 5/2 Secondary reference U.S. Government activity |
NSN 5320-00-994-8148 is a Rivet,blind, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-00-994-8148: Shank Diameter: 0.310 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN; Fastener Length: 0.704 INCHES MINIMUM AND 0.734 INCHES MAXIMUM IN; Expansion Device: SERRATED STEM-TYPE W; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.