The Rivet,solid, cataloged under National Stock Number 5320-00-954-9704, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Curtiss-Wright Controls, Inc. Div Actuation Division. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-954-9704 |
| Primary Part Number | AN123545 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Curtiss-Wright Controls, Inc. Div Actuation Division |
| Status | ACTIVE |
| Shank Diameter | 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN |
| Fastener Length | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 7229 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 0.915 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN |
| Shank Style | STRAIGHT |
| Countersink Angle | 98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM |
| Material | STEEL COMP 347 OVERALL |
| Head Major Diameter | 0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AN123545 PRIMARY | Curtiss-Wright Controls, Inc. Div Actuation Division (USA) |
NSN 5320-00-954-9704 is a Rivet,solid, manufactured by Curtiss-Wright Controls, Inc. Div Actuation Division, classified under FSC 5320, Rivets. Status: active.
NSN 5320-00-954-9704 has 1 manufacturer part number on file: AN123545 (Curtiss-Wright Controls, Inc. Div Actuation Division).
Key specifications for AN123545: Shank Diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN; Fastener Length: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN; Material Document and Classification: AMS 7229 ASSN STD SINGLE MATERIAL RESPONSE OVERALL; Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER). 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.