The Pin-Rivet, cataloged under National Stock Number 5320-00-916-9709, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-916-9709 |
| Primary Part Number | HL815-6-9 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Shank Diameter | 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 0.846 INCHES MINIMUM AND 0.862 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-8837,TY 2,CL 2 MIL SPEC 1ST TREATMENT RESPONSE OR AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OR AMS 2416 ASSN STD 3RD TREATMENT RESPONSE OVERALL |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.567 INCHES MAXIMUM IN |
| Width Between Flats | 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OR NICKEL AND CADMIUM OVERALL |
| Minimum Tensile Strength | 260000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 156000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.305 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL815-6-9 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| 66229-6-9 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HL815-6-9 | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| VS2877-6-9 | 5/2 Secondary reference U.S. Government activity |
| C3001-6-9 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5320-00-916-9709 is a Pin-Rivet, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5320, Rivets. Status: active.
NSN 5320-00-916-9709 has 3 manufacturer part numbers on file: HL815-6-9 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), 66229-6-9 (Sps Technologies, Llc Dba PB Fasteners), HL815-6-9 (Hi-Shear Corporation).
Key specifications for HL815-6-9: Shank Diameter: 0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 0.846 INCHES MINIMUM AND 0.862 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837,TY 2,CL 2 MIL SPEC 1ST TREATMENT RESPONSE OR AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OR AMS 2416 ASSN STD 3RD TREATMENT RESPONSE OVERALL; Hardness Rating: 50.0 ROCKWELL C MINIMUM AND 55.0 ROCKWELL C MAXIMUM OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.