The Pin-Rivet, cataloged under National Stock Number 5320-00-731-8178, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 10 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-731-8178 |
| Primary Part Number | HL551-6-5 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Shank Diameter | 0.1850 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Fastener Length | 0.682 INCHES MINIMUM AND 0.702 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.190 INCHES IN |
| Grip Length | 0.337 INCHES MAXIMUM IN |
| Width Between Flats | 0.791 INCHES MINIMUM AND 0.806 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 95000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 3M249A3-5 | Huck International, Inc (USA) |
| HL551-6-5 PRIMARY | Hi-Shear Corporation (USA) |
| HL551-6-5 | Howmet Global Fastening Systems Inc (USA) |
| 3M249A3-5 | The Boeing Company Div Defense (USA) |
| HL551-6-5 | Fairchild Fasteners Europe - Vsd Gmbh (DEU) |
| HL551-6-5 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| AIC-L249A6-5 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| HL551-6-5 | Satair A/s (DNK) |
| HL551-6-5 | West Coast Aerospace, Inc. (USA) |
| HL551-6-5 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| Reference | Meaning |
|---|---|
| HL551-6-5 | 5/9 Secondary reference U.S. Government activity |
NSN 5320-00-731-8178 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.
NSN 5320-00-731-8178 has 10 manufacturer part numbers on file: 3M249A3-5 (Huck International, Inc), HL551-6-5 (Hi-Shear Corporation), HL551-6-5 (Howmet Global Fastening Systems Inc), 3M249A3-5 (The Boeing Company Div Defense), HL551-6-5 (Fairchild Fasteners Europe - Vsd Gmbh) and 5 more.
Key specifications for HL551-6-5: Shank Diameter: 0.1850 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN; Fastener Length: 0.682 INCHES MINIMUM AND 0.702 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Material Document and Classification: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.