The Rivet,solid, cataloged under National Stock Number 5320-00-680-3395, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Pattonair Usa Inc Dba Incora Div Uniseal Division. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-680-3395 |
| Primary Part Number | 860-015-8-14 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Pattonair Usa Inc Dba Incora Div Uniseal Division |
| Status | ACTIVE |
| Shank Diameter | 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN |
| Fastener Length | 0.875 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Shank Style | STRAIGHT |
| Surface Treatment | ANODIZE OVERALL |
| Countersink Angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| Material | ALUMINUM ALLOY OVERALL |
| Head Major Diameter | 0.472 INCHES MINIMUM AND 0.489 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 860-015-8-14 PRIMARY | Pattonair Usa Inc Dba Incora Div Uniseal Division (USA) |
| Reference | Meaning |
|---|---|
| 860-015 1-4X7-8 | 5/9 Secondary reference Abscoa Industries Inc |
NSN 5320-00-680-3395 is a Rivet,solid, manufactured by Pattonair Usa Inc Dba Incora Div Uniseal Division, classified under FSC 5320, Rivets. Status: active.
NSN 5320-00-680-3395 has 1 manufacturer part number on file: 860-015-8-14 (Pattonair Usa Inc Dba Incora Div Uniseal Division).
Key specifications for 860-015-8-14: Shank Diameter: 0.249 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN; Fastener Length: 0.875 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER). 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.